CIZEN TECH · Technical Support

Camera module bring-up, made simple.

CameraMaster GUI and the MIG Grabber SDK provide everything you need to power up, configure, capture, and validate GMSL camera modules — from first I2C handshake to automated inspection.

Get Started → Browse the SDK

Explore the docs

Hardware

Frame Grabber

MIG-S2 / S2 Pro / S6 MIPI capture cards — key features, models, and specifications.

Viewer

CameraMaster

Real-time capture, configuration files, bring-up procedures, and the Grabber terminal.

SDK

MIG Grabber SDK

C++, Python, and C# APIs for controlling the grabber from your own application.

Setup

Driver Installation

USB driver setup for MIG-S2, S3, and S6 boards on Windows 10 / 11.

Framework

CameraMaster Framework

Build custom inspection items with FrameworkBridge and the test-item lifecycle.

Inspection

Image Kit

SFR, distortion, defect, blemish, shading — the built-in image-quality test set.

Hardware

Deserializer

TI and MAXIM deserializer selection, channel mapping, and terminal commands.

Platform

NVIDIA Jetson

Jetson TX2 / Xavier / Orin deserializer boards for GPU-side image acquisition.

Help

Technical Support

Reach the engineering team for issues that aren't covered by the docs.

Quick start

Install the driver

Install Visual C++ Redistributable 2015–2022, then the MIG driver matching your board (S2 / S6). See Driver Installation.

Install CameraMaster

Run the CameraMaster installer and launch the application. The Grabber connection status should turn green.

Load a module configuration

Pick a .ini file that matches your module / SER / DES / video format and review the contents in CameraMaster.

Bring up the camera

Power the module, initialize the sensor, and check live video. From here, run inspection items or integrate via the SDK.